Hugo

• 1: Hugo Install
• 2: Docsy Install
• 3: Docsy Config
• 4: Docsy Operate
• 5: Docsy Github

1 - Hugo Install

Requirements

I use Debian in this example, but any apt-based distro will be similar.

Preparation

Enable and pin the Debian Backports and Testing repos so you can get recent versions of Hugo and needed tools.

–> Enable and Pin

Installation

Hugo requires git and go

# Assuming you have enable backports as per above
sudo apt install -t bullseye-backports git
sudo apt install -t bullseye-backports golang-go

For a recent version of Hugo you’ll need to go to the testing repo. The extended version is recommended by Hugo and it’s chosen by default.

# This pulls in a number of other required packages, so take a close look at the messages for any conflicts. It's normally fine, though. 
sudo apt install -t testing  hugo

In some cases, you can just install from the Debian package with a lot less effort. Take a look at latest and copy the URL into a wget.

https://github.com/gohugoio/hugo/releases/latest

wget https://github.com/gohugoio/hugo/releases/download/v0.124.1/hugo_extended_0.124.1_linux-amd64.deb

Configuration

A quick test right from the quickstart page to make sure everything works

hugo new site quickstart
cd quickstart
git init
git submodule add https://github.com/theNewDynamic/gohugo-theme-ananke themes/ananke
echo "theme = 'ananke'" >> config.toml
hugo server

Open up a browser to http://localhost:1313/ and you you’ll see the default ananke-themed site.

Next Steps

The ananke theme you just deployed is nice, but a much better theme is Docsy. Go give that a try.

–> Deploy Docsy on Hugo

Links

2 - Docsy Install

Docsy is a good-looking Hugo theme that provides a landing page, blog, and a documentation sub-sites using bootstrap CSS.

The documentation site in particular let’s you turn a directory of text files into a documentation tree with relative ease. It even has a collapsible left nav bar. That is harder to find than you’d think.

Preparation

Docsy requires Hugo. Install that if you haven’t already. It also needs a few other things; postcss, postcss-cli, and autoprefixer from the Node.JS ecosystem. These should be installed in the project directory as version requirements change per theme.

mkdir some.site.org
cd some.site.org
sudo apt install -t testing nodejs npm
npm install -D autoprefixer 
npm install -D postcss
npm install -D postcss-cli

Installation

Deploy Docsy as a Hugo module and pull in the example site so we have a skeleton to work with. We’re using git, but we’ll keep it local for now.

git clone https://github.com/google/docsy-example.git .
hugo server

Browse to http://localhost:1313 and you should see the demo “Goldydocs” site.

Now you can proceed to configure Docsy!

Updating

The Docsy theme gets regular updates. To incorporate those you only have to run this command. Do this now, actually, to get any theme updates the example site hasn’t incoporated yet.

cd /path/to/my-existing-site
hugo mod get -u github.com/google/docsy

Troubleshooting

hugo

Error: Error building site: POSTCSS: failed to transform “scss/main.css” (text/css)>: Error: Loading PostCSS Plugin failed: Cannot find module ‘autoprefixer’

And then when you try to install the missing module

The following packages have unmet dependencies: nodejs : Conflicts: npm npm : Depends: node-cacache but it is not going to be installed

You may have already have installed Node.JS. Skip trying to install it from the OS’s repo and see if npm works. Then proceed with postcss install and such.

3 - Docsy Config

Let’s change the basics of the site in the config.toml file. I put some quick sed commands here, but you can edit by hand as well. Of note is the Github integration. We prepoulate it here for future use, as it allows quick edits in your browser down the road.

SITE=some.site.org
GITHUBID=someUserID
sed -i "s/Goldydocs/$SITE/" config.toml
sed -i "s/The Docsy Authors/$SITE/" config.toml
sed -i "s/example.com/$SITE/" config.toml
sed -i "s/example.org/$SITE/" config.toml
sed -i "s/google\/docsy-example/$GITHUBID\/$SITE/" config.toml 
sed -i "s/USERNAME\/REPOSITORY/$GITHUBID\/$SITE/" config.toml 
sed -i "s/https:\/\/policies.google.com//" config.toml
sed -i "s/https:\/\/github.com\/google\/docsy/https:\/\/github.com\/$GITHUBID/" config.toml
sed -i "s/github_branch/#github_branch/" config.toml

If you don’t plan to translate your site into different languages, you can dispense with some of the extra languages as well.

# Delete the 20 or so lines starting at "lLanguage] and stopping at the "[markup]" section,
# including the english section.
vi config.tml

# Delete the folders from 'content/' as well, leaving 'en'
rm -rf content/fa content/no

You should also set a default meta description or the engine will put in in the bootstrap default and google will summarize all your pages with that

vi config.toml

[params]
copyright = "some.site.org"
privacy_policy = "/privacy"
description = "My personal website to document what I know and how I did it"

Keep and eye on the site in your browser as you make changes. When you’re ready to start with the main part of adding content, take a look at the next section.

Docsy Operation

Notes

You can’t dispense with the en folder yet, as it breaks some github linking functionality you may want to take advantage of later

4 - Docsy Operate

This is a quick excerpt from the Docsy Content and Customization docs. Definitely spend time with those after reading the overview here.

Directory Layout

Content is, appropriately enough, in the content directory, and it’s subdirectories line up with the top-level navigation bar of the web site. About, Documentation, etc corresponds to content/about, content/docs and so on.

The directories and files you create will be the URL that you get with one important exception, filenames are converted to a ‘slug’, mimicking how index files work. For example, If you create the file docs/tech/mastadon.md the URL will be /docs/tech/mastadon/. This is for SEO (Search Engine Optimization).

The other thing you’ll see are _index.html files. In the example above, the URL /docs/tech/ has no content, as it’s a folder. But you can add a _index.md or .html to give it some. Avoid creating index.md or tech.md (a file that matches the name of a subdirectory). Either of those will block Hugo from generating content for any subdirectories.

The Landing Page and Top Nav Pages

The landing page itself is the content/_index.html file and the background is featured-background.jpg. The other top-nav pages are in the content folders with _index files. You may notice the special header variable “menu: main: weight: " and that is what flags that specific page as worth of being in the top menu. Removing that, or adding that (and a linkTitle) will change the top nav.

The Documentation Page and Left Nav Bar

One of the most important features of the Docsy template is the well designed documentation section that features a Section menu, or left nav bar. This menu is built automatically from the files you put in the docs folder, as long as you give them a title. (See Front Matter, below). They are ordered by date but you can add a weight to change that.

It doesn’t collapse by default and if you have a lot of files, you’ll want to enable that.

# Search and set in your config.toml
sidebar_menu_compact = true

Front Matter

The example files have a section at the top like this. It’s not strictly required, but you must have at least the title or they won’t show up in the left nav tree.

---
title: "Examples"
---

Page Content and Short Codes

In addition to normal markdown or html, you’ll see frequent use of ‘shortcodes’ that do things that normal markdown can’t. These are built in to Hugo and can be added by themes, and look like this;

{{% blocks/lead color="dark" %}}
Some Important Text
{{% /blocks/lead %}}

Diagrams

Docsy supports mermaid and a few other tools for creating illustrations from code, such as KaTeX, Mermaid, Diagrams.net, PlantUML, and MarkMap. Simply use a codeblock.

```mermaid
graph LR
 one --> two
```

Generate the Website

Once you’re satisfied with what you’ve got, tell hugo to generate the static files and it will populate the folder we configured earlier

hugo

Publish the Web Site

Everything you need is in the public folder and all you need do is copy it to a web server. You can even use git, which I advise since we’re already using it to pull in and update the module.

–> Local Git Deployment

Bonus Points

If you have a large directory structure full of markdown files already, you can kick-start the process of adding frontmatter like this;

find . -type f | \
while read X
do
  TITLE=$(basename ${X%.*})
  FRONTMATTER=$(printf -- "---\ntitle = ${TITLE}\n---")
  sed -i "1s/^/$FRONTMATTER\n/" "$X"
done

5 - Docsy Github

You may have noticed the links on the right like “Edit this page” that takes one to Github. Let’s set those up.

On Github

Go to github and create a new repository. Use the name of your side for the repo name, such as “some.site.org”. If you want to use something else, you can edit your config.toml file to adjust.

Locally

You man have noticed that Github suggested some next steps with a remote add using the name “origin”. Docsy is already using that, however, from when you cloned it. So we’ll have to pick a new name.

cd /path/to/my-existing-site
git remote add github https://github.com/yourID/some.site.org

Let’s change our default banch to “main” to match Github’s defaults.

git branch -m main

Now we can add, commit and push it up to Github

git add --all
git commit -m "first commit of new site"
git push github

You’ll notice something interesting when you go back to look at Github; all the contributers on the right. That’s because you’re dealing with a clone of Docsy and you can still pull in updates and changes from original project.

It may have been better to clone it via github